Our Model #310 For Use With 1/2' Diameter Lag Screws.

*These Assemblies Consists Of A Corrosion Resistant Zinc Flat
  Washer, A Very Unique Compression-Pak Spring, And Another
   Zinc Flat Washer. They Are Then Stacked And Covered With
   A Plastic Shrink Wrap To Reduce Moisture Contact And To
   Hold The Washers In Place For Easy Installation.

*Use Compression Fastener Assemblies Under Every Log.

*When These Assemblies Are Compressed, They Have 420
   Pounds Of Downward Force To Hold Your Logs Flat and tight!

*Both Models Have 1/2" Travel

*Pilot Hole Is Drilled In The Top Log (Log With The Compression Fastener Assembly).

*Hole Must Be Square To Work Properly.

*Use Your Manufactures Recommendations On Spacing-Generally 2' - 4' on Center.

*If the Log Is Excessively Bowed Or Twisted And You Do Not Have A Substitute Log, Use
  Several Compression Fastener Assemblies To Maintain The Logs Position.

*Works With Any Style Log

*Allows Natural Expansion & Contraction During Seasonal Changes, While Maintaining
  Downward Force.

*Inexpensive Investment Towards Your New Log Home!

*Lags Are Not Included In The Price Of The Compression Fastener Assembly.

Prices, specifications and availability subject to change.

Copyright Compression-Pak Inc. 2004