Spike Fastener Assemblies
  
   *The Model #200 For Use With 3/8" Diameter Spikes.

*This Assembly Consists Of A Corrosion Resistant Zinc Flat
  Washer, A Very Unique Compression-Pak Spring, And
  Another Zinc Flat Washer. It Is Then Stacked And Covered With A Plastic Shrink Wrap To Reduce Moisture Contact
  And To Hold The Washers In Place For Easy Installation.

*Use Compression Fastener Assemblies Under Every Spike.

*When This Assembly Is Compressed, It Has 275 Pounds Of
  Downward Force To Hold Your Logs Flat.

*The Model #200 Has 1/2" Travel

*Pilot Hole Is Drilled In The Top Log (Log With The
  Compression Fastener Assembly).

*Hole Must Be Square To Work Properly.

*Use Your Manufacturers Recommendations On Spacing-Generally 2' - 4' On Center.

*If Log Is Excessively Bowed Or Twisted And You Do Not Have A Substitute Log, Use
  Several Compression Fastener Assemblies To Maintain The Log's Position.

*Allows Natural Expansion & Contraction During Seasonal Changes, While Maintaining
  Downward Force.

*Works With Any Style Log!

*An Inexpensive Investment Towards Your New Log Home!

*Spikes Not Included In The Price Of The Compression Fastener Assembly.